| 细旦涤纶低弹网络丝的生产工艺 |
| |
| 引用本文： | 王延伟,宋会芬,王岳安,蒋同德.细旦涤纶低弹网络丝的生产工艺[J].合成纤维工业,2000,23(4):61-63. |
| |
| 作者姓名： | 王延伟 宋会芬 王岳安 蒋同德 |
| |
| 作者单位： | 1. 河南纺织高等专科学校,郑州,450007
2. 新乡白鹭化纤有限公司 |
| |
| 摘 要： | 研究了 83.3dtex/ 72 f细旦涤纶低弹网络丝在生产过程中纺丝温度、上油率、POY断裂伸长、条干不匀率、网络工艺等因素对生产的影响。结果表明 ,纺丝温度 2 88℃ ,上油率控制在 0 .5%～ 0 .6 %,条干不匀率小于 3.75%,网络工艺控制要防止出现飘丝 ,可生产出优质细旦纤维。
|
| 关 键 词： | 细旦 网络丝 工艺 聚对苯二甲酸乙二酯纤维 |
| 修稿时间： | 1999-10-09 |
PRODUCTION TECHNOLOGY OF FINE DENIER LOW-ELASTIC INTERLACED PET YARN |
| |
| Wang Yanwei,Song Huifen,Wang Yuean,Jiang Tongde.PRODUCTION TECHNOLOGY OF FINE DENIER LOW-ELASTIC INTERLACED PET YARN[J].China Synthetic Fiber Industry,2000,23(4):61-63. |
| |
| Authors: | Wang Yanwei Song Huifen Wang Yuean Jiang Tongde |
| |
| Abstract: | The effects of spinning parameters such as spinning temperature, oiling, POY elongation at break, yarn unevenness and interlacing process on the production of 83 3 dtex/72f fine denier low\|elastic interlaced PET yarn were studied. The result showed that the top\|quality fine denier fiber could be obtained when the spinning parameters were selected as the spinning temperature of 288℃, oil up\|take in the range of 0 5%~0 6% and yarn uneveness below 3 75% (CV) and when drift filament was successfully avoided during the course of interlacing. |
| |
| Keywords: | fine denier interlaced yarn technological process polyethylene terephthalate fiber |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
