| 印制电路板中电磁屏蔽技术的应用 |
| |
| 引用本文： | 刘昕卓,骆枫,杨显清,王园. 印制电路板中电磁屏蔽技术的应用[J]. 中国测试, 2012, 0(1): 41-43,47 |
| |
| 作者姓名： | 刘昕卓 骆枫 杨显清 王园 |
| |
| 作者单位： | 电子科技大学电子工程学院;四川大学化学工程学院 |
| |
| 摘 要： | 为保证印制电路板产品的正常工作且不影响周围的电磁环境,基于国际电工委员会的CISPR-22标准中CLASS B要求,搭建测试平台,利用10 m电波暗室对印制电路产品进行电场辐射发射测试,得出印制电路板产品的电场辐射波形不符合参考标准的要求。通过对辐射波形的分析研究,利用电磁屏蔽技术对印制电路板进行改进,再次对该板做辐射发射测试,基本达到参考标准的要求。
|
| 关 键 词： | 电磁兼容 印制电路板 电磁屏蔽 辐射发射 测试 标准 |
Application of electromagnetic shielding technology in PCB |
| |
| LIU Xin-zhuo,LUO Feng,YANG Xian-qing,WANG Yuan. Application of electromagnetic shielding technology in PCB[J]. CHINA MEASUREMENT & TESTING, 2012, 0(1): 41-43,47 |
| |
| Authors: | LIU Xin-zhuo LUO Feng YANG Xian-qing WANG Yuan |
| |
| Affiliation: | 1.School of Electronic Engineering,University of Electronic Science and Technology of China, Chengdu 611731,China; 2.School of Chemical Engineering,Sichuan University,Chengdu 610064,China) |
| |
| Abstract: | In order to make the printed circuit board(PCB) product can work normally and do not influence the electromagnetic environment around,an experiment platform has been set up according to the requirements of CISPR-22 CLASS B published by IEC,and PCB product tests were performed with radiation emission in 10 m electric-wave chamber.The figure of radiated electric field was tested but the result didn’t satisfy CISPR-22 CLASS B.The PCB was improved by electromagnetic shielding technology according to the analysis and research of radiation figure and tested again.The result is that PCB satisfied the CISPR-22 CLASS B. |
| |
| Keywords: | electromagnetic compatibility printed circuit board electromagnetic shielding radiation emission test standard |
| 本文献已被 CNKI 等数据库收录！ |
|
