首页 | 本学科首页   官方微博 | 高级检索  
     

离子液体N-甲基咪唑对甲苯磺酸盐催化剂的制备及应用
引用本文:蔡源.离子液体N-甲基咪唑对甲苯磺酸盐催化剂的制备及应用[J].上海化工,2009,34(2):18-20.
作者姓名:蔡源
作者单位:南京化工职业技术学院,江苏 南京,210048
摘    要:采用一步法制备Brφnsted酸性离子液体N-甲基咪唑对甲苯磺酸盐催化剂(Hmjm]TsO),并对其进行了红外光谱、拉曼光谱等表征。将其应用于醋酸和正丁醇的酯化反应,详细考察了离子液体用量、反应时间、醇酸物料比、反应温度等因素对酯化反应的影响,并确定了较佳反应条件为:温度95~98℃,n(丁醇):n(醋酸):1.2:1,离子液体用量为反应物总质量的20.O%,反应时间6h,酯化率可达到85.0%。同时,Hmim]TsO离子液体循环使用6次后,酯化率仍可达到78.2%。

关 键 词:Brφnsted酸性离子液体  TsO  醋酸丁酯  酯化

Preparation of an Ionic Liquid [Hmim]TsO and Its Use as Catalyst for Esterification
Cai Yuan.Preparation of an Ionic Liquid [Hmim]TsO and Its Use as Catalyst for Esterification[J].Shanghai Chemical Industry,2009,34(2):18-20.
Authors:Cai Yuan
Abstract:A novel ionic liquid Hmim]TsO catalyst was prepared with one step method. The catalyst was characterized by FT-IR, FTRaman. Ionic liquid was used in esterification reaction of acetic acid and n-butyl alcohol. Hmim]TsO is a good substitute of conventional catalyst system as catalyst. The influencing factors of reaction were measured including amount of ionic liquids, reaction time, mole ratio of n-butanol to acetic acid, reaction temperature. The optimization conditions were: reaction temperature 95-98 ℃, mole ratio of n-butanol to acetic acid 1.2:1, ionic liquids mass fraction 20.0% in reaction medium, and the reaction time 6 h. Under the optimization conditions, the yield of n-butyl acetate is 85.0%. The ionic liquid could be reused, and the yield still reaches 78.2% after reused 6 times.
Keywords:[Hmim]TsO
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号