| 汽车覆盖件模具激光表面强化中环带区域的测量及轨迹规划 |
| |
| 引用本文： | 王建伦,虞钢. 汽车覆盖件模具激光表面强化中环带区域的测量及轨迹规划[J]. 应用激光, 2005, 25(4): 227-229 |
| |
| 作者姓名： | 王建伦 虞钢 |
| |
| 作者单位： | 中国科学院力学研究所,北京,100080 |
| |
| 基金项目： | 中国科学院"知识创新工程"重大项目(KGCX1-11)资助 |
| |
| 摘 要： | 在模具表面激光强化中,测量及轨迹规划是工艺实值墓丶方?本文针对汽车覆盖件模具表面较为常见的侧壁结构,从中抽取出更为基本的一类型面--环带,提出了一种基于特征线的环带测量及轨迹规划的方法.并且在建立环带数学模型的基础上对误差进行了分析,证明了这种方法不仅简单、高效,而且满足相应的加工工艺要求.
|
| 关 键 词： | 激光强化 汽车覆盖件模具 环带 轨迹规划 |
| 收稿时间： | 2005-06-25 |
| 修稿时间： | 2005-06-25 |
Measurement And Path Planning of Ring Zone on Automobile Covering Dies for Laser Hardening |
| |
| Wang Jianlun,Yu Gang. Measurement And Path Planning of Ring Zone on Automobile Covering Dies for Laser Hardening[J]. Applied Laser, 2005, 25(4): 227-229 |
| |
| Authors: | Wang Jianlun Yu Gang |
| |
| Abstract: | Measurement and path planning are key steps in laser hardening. Ring zone is a common surface type on automobiles covering dies. A method of measurement and path planning based on feature lines was introduced. Error analysis was done on a mathematical model of ring zone. Which indicates that the method is not only simple and effective, but also meet to the requirements of manufacturing |
| |
| Keywords: | Laser hardening Automobile covering dies Ring zone Path planning |
| 本文献已被 万方数据 等数据库收录！ |
|
