| 高韧性药芯焊丝焊缝金属的显微组织 |
| |
| 引用本文： | 余圣甫,李志远,刘顺洪,谢明立.高韧性药芯焊丝焊缝金属的显微组织[J].材料开发与应用,1999,14(3):20-23. |
| |
| 作者姓名： | 余圣甫 李志远 刘顺洪 谢明立 |
| |
| 作者单位： | 华中理工大学,武汉,430074 |
| |
| 摘 要： | 测试了高韧性药芯焊丝焊缝金属在－２０℃时的ＣＴＯＤ阻力曲线，用扫描电镜和透射电镜分析了焊缝金属的显微组织，测定了焊缝金属中非金属夹杂物尺寸大小。结果表明，焊缝金属含有约９０％的针状铁素体时，在－２０℃时的断裂韧性特征值δ０．２可达０．１５１ｍｍ。
|
| 关 键 词： | 药芯焊丝 焊缝金属 针状铁素体 断裂韧性 |
Microstructure of Weld Metal Prepared with High Fracture Toughness Flux-cored Wire |
| |
| Yu Shengfu,Li Zhiyuan,Liu Shunhong,Xie Mingli.Microstructure of Weld Metal Prepared with High Fracture Toughness Flux-cored Wire[J].Development and Application of Materials,1999,14(3):20-23. |
| |
| Authors: | Yu Shengfu Li Zhiyuan Liu Shunhong Xie Mingli |
| |
| Abstract: | The CTOD resistant curve of weld metal prepared with fluxcored wire at -20 was determined. The microstructures of the weld metal were analyzed with scanning electron microscopy and transmission electron microscopy and the size of nonmetallic inclusion in the weld metal was measured. The results show that the value of fracture toughness 0.2 of weld metal is 0.151mm at -20 where includes about 90% acicular ferrite T5HZ |
| |
| Keywords: | Fluxcored wireWeld metalAcicular ferriteFracture toughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
