首页 | 本学科首页   官方微博 | 高级检索  
     

连续重整进料硫含量超高事故分析
引用本文:刘文凤,杜三旺.连续重整进料硫含量超高事故分析[J].当代化工,2014(1):105-106,110.
作者姓名:刘文凤  杜三旺
作者单位:中化泉州石化有限公司,福建泉州362103
摘    要:简述了连续重整装置重整反应部分硫中毒的现象,通过分析得出罐区来的精制石脑油所带溶解氧与预加氢反应产生的硫化氢在汽提塔内生成单质硫,是引起硫含量偏高的原因。切断罐区来精制石脑油进汽提塔后,重整进料硫含量恢复正常。

关 键 词:连续重整  单质硫  精制石脑油

Accident Analysis of Sulfur Exceeding Standard in Feed of Catalytic Reforming Unit
LIU Wen-feng,DU San-wang.Accident Analysis of Sulfur Exceeding Standard in Feed of Catalytic Reforming Unit[J].Contemporary Chemical Industry,2014(1):105-106,110.
Authors:LIU Wen-feng  DU San-wang
Affiliation:(Sinoehem Quanzhou Petrochemical Co., Ltd., Fujian Quanzhou 362103, China)
Abstract:The phenomenon of sulfur exceeding standard in feed of catalytic reforming unit was described. Reasons to cause the phenomenon were investigated. The results show that, dissolved oxygen in refined naphtha from tank farm reacted with hydrogen sulfide from prehydrogenating reactor to produce elemental sulfur in stripping column, which caused the high sulfur content in reforming feed. Sulfur content in reforming feed returned to normal level after cutting refined naphtha into stripping column.
Keywords:Continuous catalytic reforming unit(CCR)  Sulfiar  Refined naphtha
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号