| 18.00-25 40PR无内胎工程机械轮胎的设计 |
| |
| 引用本文： | 郦坚,王洁,黄勤. 18.00-25 40PR无内胎工程机械轮胎的设计[J]. 轮胎工业, 2011, 31(8): 467-469 |
| |
| 作者姓名： | 郦坚 王洁 黄勤 |
| |
| 作者单位： | 杭州中策橡胶有限公司,浙江杭州,310008 |
| |
| 摘 要： | 介绍18.00-25 40PR无内胎工程机械轮胎的设计。结构设计：外直径1 670 mm,断面宽462 mm,行驶面宽度430 mm,行驶面弧度高23 mm,胎圈着合直径632 mm,胎圈着合宽度330 mm,断面水平轴位置（H1/H2）0.853 6,采用八角花纹,花纹深度55 mm,花纹饱和度78%,花纹周节数28。施工设计：胎体采用20层2100dtex/2V1锦纶66浸胶帘布,缓冲层采用2层930dtex/2V3锦纶66浸胶帘布;采用LCX-5型半芯轮式成型机成型,硫化罐硫化。成品轮胎性能试验结果表明,轮胎充气外缘尺寸和物理性能符合相应设计和国家标准要求。
|
| 关 键 词： | 工程机械轮胎 无内胎 结构设计 施工设计 |
Design of 18.00-25 40PR Tubeless OTR Tire |
| |
| LI Jian,WANG Jie and HUANG Qin. Design of 18.00-25 40PR Tubeless OTR Tire[J]. Tire Industry, 2011, 31(8): 467-469 |
| |
| Authors: | LI Jian WANG Jie HUANG Qin |
| |
| Affiliation: | LI Jian,WANG Jie,HUANG Qin(Hangzhou Zhongce Rubber Co.,Ltd,Hangzhou 310008,China) |
| |
| Abstract: | A design of 18.00-25 40PR tubeless OTR tire was described.In structure design,the following parameters were taken:overall diameter 1 670 mm,cross sectional width 462 mm,width of running surface 430 mm,height of running surface 23 mm,bead diameter at rim seat 632 mm,bead width at rim seat 330 mm,cross-sectional level ratio(H1/H2) 0.853 6,with the design of octagon pattern,pattern depth 55 mm,block/groove ratio 78%,number of pattern pitch 28.In construction design,the following processes were taken:20 layers ... |
| |
| Keywords: | OTR tire tubeless structure design construction design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
|
