首页 | 本学科首页   官方微博 | 高级检索  
     

带有侧向进水旋转滤网的泵房进水流道模型分析
引用本文:高志娟,李铎,王念慎,郑大琼. 带有侧向进水旋转滤网的泵房进水流道模型分析[J]. 中国给水排水, 2006, 22(16): 48-51
作者姓名:高志娟  李铎  王念慎  郑大琼
作者单位:1. 石家庄经济学院,工程学院,河北,石家庄,050031
2. 中国水利水电科学研究院,北京,100038
摘    要:苏州华能电厂循环水泵房旋转滤网采用了侧向进水的布置形式,其进水流道长度只有泵吸管喇叭口直径的7.36倍,较常规设计(9D)偏短,水工模型试验结果表明该设计是合理的:同时与减小进水流道长度和滤网出口至两边导墙的扩散角以及降低胸墙底部高程等不同方案进行了对比试验,探讨了优化设计的可能性,对类似工程的设计和研究具有很好的参考价值。

关 键 词:循环水泵房  进水流道  侧向进水旋转滤网
文章编号:1000-4602(2006)16-0048-04
收稿时间:2006-01-05
修稿时间:2006-01-05

Model Analysis of Inlet Conduit of Circulating Water Pump Station with Side-inlet Rotating Filter Net
GAO Zhi-juan,LI Duo,WANG Nian-shen,ZHENG Da-qiong. Model Analysis of Inlet Conduit of Circulating Water Pump Station with Side-inlet Rotating Filter Net[J]. China Water & Wastewater, 2006, 22(16): 48-51
Authors:GAO Zhi-juan  LI Duo  WANG Nian-shen  ZHENG Da-qiong
Affiliation:1. College of Engineering, Shijiazhuang University of Economies, Shijiazhuang 050031, China ; 2. China Institute of Water Resources and Hydropower Research, Beijing 100038, China
Abstract:The side-inlet rotating filter net is used in circulating water pump station of Suzhou Huaneng Thermal Power Plant. The preliminary design of inlet conduit length is 7.36 times of the diameter of pump suction pipe bellmouth, which is shorter than the normal design of 9D. The results of hydraulic model test show that the design is reasonable. The comparative tests on different schemes of reducing inlet conduit length and diffusion angle from filter net outlet to both guide wall and lowering elevation of breast wall bottom were conducted. The possibility of optimizing design is discussed. It may provide a good reference for similar project design and research.
Keywords:circulating water pump station   inlet conduit   side-inlet rotating filter net
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号