| 先进控制在铜锍吹炼造渣期终点判断的应用 |
| |
| 引用本文： | 黄惠娟,李鸣,刘国平.先进控制在铜锍吹炼造渣期终点判断的应用[J].计算机与现代化,2008(1):52-54. |
| |
| 作者姓名： | 黄惠娟 李鸣 刘国平 |
| |
| 作者单位： | 1. 南昌大学环境科学与工程学院,江西,南昌,330031
2. 南昌大学机电工程学院,江西,南昌,330031 |
| |
| 摘 要： | 针对现代铜冶金工业急待解决的铜锍吹炼工序“定终点”难的问题．本文提出一种基于先进控制技术的铜锍吹炼终点判断方法，建立了造渣期终点自动控制的DMC模型，并利用MATLAB软件的模型预测控制工具箱进行试验仿真。结果显示系统具有较高的准确度和良好的鲁棒性，证明了该策略的可行性。
|
| 关 键 词： | 铜矿冶金 吹炼 先进控制 仿真 |
| 文章编号： | 1006-2475（2008）01-0052-03 |
| 收稿时间： | 2007-06-11 |
| 修稿时间： | 2007年6月11日 |
Application of Advanced Control in Estimating Matte Converting Slagging Period's Terminal Point |
| |
| HUANG Hui-juan,LI Ming,LIU Guo-ping.Application of Advanced Control in Estimating Matte Converting Slagging Period's Terminal Point[J].Computer and Modernization,2008(1):52-54. |
| |
| Authors: | HUANG Hui-juan LI Ming LIU Guo-ping |
| |
| Affiliation: | HUANG Hui-juan, LI Ming , LIU Guo-ping (1. Environmental Science and Engineering School, Nanchang University, Nanchang 330031, China; 2. Mechanical and Electronic Engineering School, Nanchang University, Nanchang 330031, China) |
| |
| Abstract: | For the difficulty in concluding terminal point of matte converting process,this article researches an effective control method by using advanced control.A DMC model of slagging period terminal point control system is presented.Its effectiveness is validated by a simulation actualized with the MPC toolbox in MATLAB.The result showes this control method's feasibility. |
| |
| Keywords: | copper metallurgy converting advanced control simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
