首页 | 本学科首页   官方微博 | 高级检索  
     

峰值电流控制FAC变换器小信号建模与分析
引用本文:薛飞,丁泳鑫,龚春英. 峰值电流控制FAC变换器小信号建模与分析[J]. 电力电子技术, 2011, 45(6): 32-34
作者姓名:薛飞  丁泳鑫  龚春英
作者单位:南京航空航天大学;
摘    要:有源箝位正激(FAC)拓扑在中小功率DC/DC模块电源中具有广泛的应用,其中的Boost型FAC由于辅助开关管驱动无需隔离,因此更为简单可靠,易于实现.根据状态空间平均法对峰值电流控制的Boost型FAC变换器建立了交流小信号模型,得到电路的交流小信号状态方程及等效电路图,并由此推导出电路的开环传递函数.通过将电流内环...

关 键 词:变换器  峰值电流控制  有源箝位正激  小信号建模

Small Signal Modeling and Experimental Analysis of Peak Current Mode Controlled Boost Type FAC
XUE Fei,DING Yong-xin,GONG Chun-ying. Small Signal Modeling and Experimental Analysis of Peak Current Mode Controlled Boost Type FAC[J]. Power Electronics, 2011, 45(6): 32-34
Authors:XUE Fei  DING Yong-xin  GONG Chun-ying
Affiliation:XUE Fei,DING Yong-xin,GONG Chun-ying(Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China)
Abstract:Active clamp forward(FAC) converter is widely used in small and medium sized power DC/DC module converters.Especially,the Boost type FAC is simpler,safer and easier to be realized,because the auxiliary switch dose not need an isolated gate drive signal.A small signal model of Boost type FAC converter is built by state-space averaging approach,and an AC small-signal state equation and an equivalent circuit are obtained.Therefore,the open-loop transfer functions of the entire circuit are presented.Then the am...
Keywords:converter  peak current control  active clamp forward  small signal model  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号