| 现场施焊钛设备裂纹成因及质量控制研究 |
| |
| 引用本文： | 阮鑫,王成君,哈健牛. 现场施焊钛设备裂纹成因及质量控制研究[J]. 装备制造技术, 2007, 0(2): 38-41 |
| |
| 作者姓名： | 阮鑫 王成君 哈健牛 |
| |
| 作者单位： | 1. 河北化工医药职业技术学院,河北,石家庄,050026
2. 河北特种装备安装工程公司,河北,石家庄,050031 |
| |
| 基金项目： | 河北化工医药职业技术学院自然科学基金 |
| |
| 摘 要： | 结合近几年现场试验与施工实践,着重分析研究了制作安装钛设备(工业纯钛)的焊接裂纹与形成机理(有些值得探讨的创新内容),以及防止与消除其缺陷、优化制造施焊质量的工艺措施。为提高焊接一次合格率及返修成功率,还总结出若干条注意事项。
|
| 关 键 词： | 施工现场 钛设备 焊接裂纹 形成机理 防范对策 |
| 文章编号： | 1672-545X(2007)04-0038-04 |
| 修稿时间： | 2006-12-11 |
Study on the Crack Genesis and Quality Control for Welding Titanium Equipment |
| |
| RUAN Xin,WANG Cheng-jun,HA Jian-niu. Study on the Crack Genesis and Quality Control for Welding Titanium Equipment[J]. , 2007, 0(2): 38-41 |
| |
| Authors: | RUAN Xin WANG Cheng-jun HA Jian-niu |
| |
| Abstract: | Combining with the experiences of site operation in these years, lays emphasis on analyzing the welding cracks caused during manufacturing and installing titanium equipments and their forming mechanism, the measures of preventing and eliminating the flaws, increasing the welding quality, etc.. Some matters need attention are also summed up in this paper to raise the primary percent of pass and success rate of repair. |
| |
| Keywords: | Job location Titanium equipment Welding crack Forming mechanism Countermeasure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
