| 薄膜干燥器内丙酸钙的干燥性能分析 |
| |
| 引用本文： | 陈广宇,李庆生,李乃宇.薄膜干燥器内丙酸钙的干燥性能分析[J].食品与机械,2015,31(3):97-101. |
| |
| 作者姓名： | 陈广宇 李庆生 李乃宇 |
| |
| 作者单位： | 南京工业大学机械与动力工程学院 |
| |
| 摘 要： | 建立薄膜干燥器的工艺计算数学模型,以25%丙酸钙为研究对象,采用数值模拟软件MATLAB对模型进行数值求解,得到薄膜干燥器的干燥段长度和干燥率,探讨进料温度、转子转速、进料量和加热温度对干燥率和干燥段长度的影响。结果表明,进料量和加热温度对干燥率和干燥段长度影响较大,而进料温度和转速影响较小,该结果可为丙酸钙的干燥提供依据。
|
| 关 键 词： | 薄膜干燥器 MATLAB 干燥率 干燥段长度 |
| 收稿时间： | 2014/9/15 0:00:00 |
Analysis on drying performance of calcium propionate in thin-film dryer |
| |
| CHENGuangyu,LIQingsheng,LINaiyu.Analysis on drying performance of calcium propionate in thin-film dryer[J].Food and Machinery,2015,31(3):97-101. |
| |
| Authors: | CHENGuangyu LIQingsheng LINaiyu |
| |
| Affiliation: | College of Mechanical and Power Engineering, Nanjing Tech University, Nanjing, Jiangsu 211816, China |
| |
| Abstract: | The thin-film dryer process calculation mathematical model was established, with 25% calcium propionate as the research object, using the numerical simulation software MATLAB, drying rate and drying length was obtained and the influence of feed temperature, rotate speed, feed rate, and heating temperature was also discussed. The results showed that feed rate and heating temperature had a great influence on drying rate and drying length, while feed temperature and rotate speed had less influence on drying rate and drying length, which provided the basis for calcium propionate drying. |
| |
| Keywords: | thin-film dryer MATLAB drying rate drying length |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《食品与机械》浏览原始摘要信息 |
|
点击此处可从《食品与机械》下载全文 |
|
