| Fe-1.6%Si无取向硅钢粗轧过程中板坯翘头原因分析 |
| |
| 引用本文： | 韩斌,汪水泽,李长生.Fe-1.6%Si无取向硅钢粗轧过程中板坯翘头原因分析[J].钢铁研究,2010,38(1):15-17. |
| |
| 作者姓名： | 韩斌 汪水泽 李长生 |
| |
| 作者单位： | 1. 武汉钢铁(集团)公司,研究院,湖北,武汉,430080
2. 东北大学轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004 |
| |
| 摘 要： | 无取向硅钢在粗轧过程中具有不同于普通钢的头部翘曲现象。分析了影响无取向硅钢板坯头部翘曲的可能性因素,指出相变是导致无取向硅钢粗轧过程中翘头规律异于普通钢的根本原因。利用Gleeble1500热模拟试验机得到Fe-1.6%Si无取向硅钢的温度-变形抗力曲线,分析了相变对变形抗力的影响,提出了解决板坯翘头问题的方法以及研究思路。
|
| 关 键 词： | 硅钢 无取向 翘头 粗轧 |
Analysis of causes of ski-up during rough rolling of Fe-1.6 %Si non-oriented silicon steel |
| |
| HAN Bin,WANG Shui-ze,LI Chang-sheng.Analysis of causes of ski-up during rough rolling of Fe-1.6 %Si non-oriented silicon steel[J].Research on Iron and Steel,2010,38(1):15-17. |
| |
| Authors: | HAN Bin WANG Shui-ze LI Chang-sheng |
| |
| Affiliation: | 1.Research and Development Center of WISCO;Wuhan 430080;China;2.The State Key Lab of Rolling Technology and Automation;Northeastern University;Shenyang 110004;China |
| |
| Abstract: | Non-oriented silicon steel is different from plain steel in warping phenomenon during rough rolling.Some factors which may affect slab warping of non-oriented electrical steel were analyzed in this article.Phase transition is the basic reason for the difference of slab warping between non-oriented electrical steel and plain steel.By using Gleeble 1500 thermal simulation test machine,the curve of temperature-deformation resistance of Fe-1.6%Si non-oriented silicon steel had been obtained,and the effect of ph... |
| |
| Keywords: | silicon steel non-oriented ski-up rough rolling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
