| 包覆和凝胶注模成型对氮化硅陶瓷性能的影响 |
| |
| 引用本文： | 周龙捷,黄勇,谢志鹏,杨金龙. 包覆和凝胶注模成型对氮化硅陶瓷性能的影响[J]. 材料工程, 2001, 0(8): 40-43 |
| |
| 作者姓名： | 周龙捷 黄勇 谢志鹏 杨金龙 |
| |
| 作者单位： | 清华大学材料科学与工程系新型陶瓷与精细工艺国家重点实验室!北京100084(周龙捷，黄勇，谢志鹏)，清华大学材料科学与工程系新型陶瓷与精细工艺国家重点 (杨金龙) |
| |
| 摘 要： | 利用含 Al (NO3) 3,Y (NO3) 3和尿素的水溶液中无机盐的沉淀再经煅烧在 Si3N4粉料的表面包覆 Y2 O3- Al2 O3层 ,作为氮化硅烧结的助烧剂。包覆层改变了 Si3N4粉料的电动性和胶态特性 ,从而提高了 Si3N4的分散性。研究表明 ,经包覆和凝胶注模成型的方法所制备的氮化硅烧结体较冷等静压方法所获得的烧结体的抗弯强度和 Weibull模数都大大提高
|
| 关 键 词： | 氮化硅 包覆 凝胶注模成型 性能 陶瓷 |
| 文章编号： | 1001-4381(2001)08-0040-04 |
| 修稿时间： | 2000-01-05 |
Influence of Coating and Gelcasting on Properties of Silicon Nitride Ceramic |
| |
| ZHOU Long jie,HUANG Yong,XIE Zhi peng,YANG Jin long. Influence of Coating and Gelcasting on Properties of Silicon Nitride Ceramic[J]. Journal of Materials Engineering, 2001, 0(8): 40-43 |
| |
| Authors: | ZHOU Long jie HUANG Yong XIE Zhi peng YANG Jin long |
| |
| Abstract: | A layer of Y 2O 3 Al 2O 3, using as sintering aids, was coated on the surface of Si 3N 4 particles by precipitation of inorganic salts from a water based solution containing Al(NO 3) 3, Y(NO 3) 3 and urea The electrokinetic and colloidal characteristics of Si 3N 4 powder was greatly changed by the coating layer As a result, dispersion of Y 2O 3 Al 2O 3 coated Si 3N 4 powder is greatly increased compared to that of the original powder Surface coating as well as gelcasting process greatly improves the room temperature bending strength and Weibull modulus of the resulting ceramic bodies |
| |
| Keywords: | silicon nitride coating gelcasting property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
