| Abstract: | The properties of polypropylene (PP)/polyamide 6 (PA) blends, obtained by the following two different blending methods, were investigated. Blends of PP/PA and PP/PA/maleic anhydride have been prepared using a twin screw extruder and a fiber cutting, flying and mixing apparatus that directly commingles PP fiber and PA fiber. The properties measured include rheological properties by means of a capillary rheometer, morphologies by scanning electron microscopy, and mechanical properties by a universal testing machine and a high rate impact tester. In the presence of compatibilizer, a marked dispersibility of the polymer blends of PP and PA was observed, and mechanical properties were found to increase as a result of improvement of the interfacial adhesion and the dispersibility. The properties of PP/PA blends manufactured by two different pieces of equipment were shown to be similar in the case of melting both resins. But in particular, superior impact properties were obtained in blends not melting PA fibers as a dispersed phase rather than blends using maleic anhydride grafted polypropylene (PP-g-MA) as a compatibilizer. |
