| 含碳球团生产工艺参数优化及固结机理研究 |
| |
| 引用本文： | 张旭,张建良,郭豪,刘征建,柏凌. 含碳球团生产工艺参数优化及固结机理研究[J]. 过程工程学报, 2009, 9(Z1) |
| |
| 作者姓名： | 张旭 张建良 郭豪 刘征建 柏凌 |
| |
| 作者单位： | 北京科技大学冶金与生态工程学院,北京,100083 |
| |
| 摘 要： | 实验研究了含碳球团高温自还原特性,考察了焙烧温度、C/O、焙烧时间等工艺参数对含碳球团还原后金属化率和强度指标的影响,利用XRD和SEM显微分析研究了球团还原过程和固结机理.正交实验结果表明,焙烧温度是影响两项指标的最重要因素,C/O次之,焙烧时间的影响不显著.在焙烧温度1350℃、C/O比1.15、焙烧时间25 min的最佳工艺条件下,金属化率最高为85.33%,球团的抗压强度达到2248 N.
|
| 关 键 词： | 含碳球团 转底炉 金属化率 抗压强度 |
Experimental Study on Optimization of Technological Parameters and Agglomeration Mechanism of Carbon-containing Pellets |
| |
| ZHANG Xu,ZHANG Jian-liang,GUO Hao,LIU Zheng-jian,BAI Ling. Experimental Study on Optimization of Technological Parameters and Agglomeration Mechanism of Carbon-containing Pellets[J]. Chinese Journal of Process Engineering, 2009, 9(Z1) |
| |
| Authors: | ZHANG Xu ZHANG Jian-liang GUO Hao LIU Zheng-jian BAI Ling |
| |
| Affiliation: | School of Metallurgical and Ecological Engineering;University of Science and Technology Beijing;Beijing 100083;China |
| |
| Abstract: | The high temperature self-reduction characteristics of carbon-containing pellets were studied. The effects of roasting temperature,C/O,and roasting time on metallization rate and strength index were investigated. The reduction process and agglomeration mechanism were examined with XRD and SEM microscopic analysis. Based on orthogonal test results, it was shown that roasting temperature was the most important factor,C/O also had important effect on two parameters,while roasting time had little effect. The op... |
| |
| Keywords: | carbon-containing pellets RHF metallization rate compressive strength |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
