Abstract: | Polymer film-type channel electron multipliers (CEMs) were developed and their characteristics investigated in comparison with bulk-type flexible CEM. As film-type CEMs, a paint-coating-type CEM and a solvent-etching-type CEM were fabricated. The paint-coating-type CEM is made by coating a “paint” which is prepared by dissolving in a solvent an electronically conductive polymeric composition having a high secondary electron emission yield. Up to the present study the mean gain of the film-type CEM, in spite of the lower resistivity of the dynode, seems to be slightly more dependent on the count rate than that of the bulk-type CEM made of the same material. However, the convenience of fabricating the dynode film by coating the dynode-forming paint on the internal surface of any shaped tube or a flexible polymer tube would overcome the slight disadvantage mentioned above. |