首页 | 本学科首页   官方微博 | 高级检索  
     

改善低硅烧结矿冶金性能的研究及实践
引用本文:张玉柱,冯向鹏,李振国,尹海生,田建军,李贵阳,龚树山,张聪山,乔启平,李豪杰. 改善低硅烧结矿冶金性能的研究及实践[J]. 烧结球团, 2004, 29(1): 4-7
作者姓名:张玉柱  冯向鹏  李振国  尹海生  田建军  李贵阳  龚树山  张聪山  乔启平  李豪杰
作者单位:河北理工学院;宣化钢铁集团公司
摘    要:为了改善低硅烧结矿的冶金性能,作者从烧结矿的显微结构和矿物组成出发,研究了SiO2含量与烧结矿低温还原粉化性能之间的关系,以及烧结矿碱度、MgO含量、配碳量、添加硼酸和喷洒CaCl2溶液等对低硅烧结矿冶金性能的影响。利用这些试验结果来指导宣钢烧结生产,结果使SiO2含量为4.0%的烧结矿的冶金性能达到了入炉要求。

关 键 词:低硅烧结  冶金性能  措施  生产应用
修稿时间:2003-05-19

STUDY AND PRACTICE OF IMPROVING THE METALLURGICAL PROPERTY OF LOW SILICON SINTER
Zhang Yuzhu et al. STUDY AND PRACTICE OF IMPROVING THE METALLURGICAL PROPERTY OF LOW SILICON SINTER[J]. Sintering and Pelletizing, 2004, 29(1): 4-7
Authors:Zhang Yuzhu et al
Affiliation:Zhang Yuzhu et al
Abstract:In order to improve RDI of the low silicon sinter,the relationship of SiO 2 content in sinter with its metallurgical property was studied by the X-ray and electron microprobe analysis And the influence of some factors,for example basicity,carbon addtion ratio,MgO content,adding the boric acid and spraying CaCl 2 solution etc on RDI of the low silicon sinter were also studied and analyzed Applying these experimental results to quid the sintering operating in XUANHUA I&S Co as a result the RDI of the sinter,in it the SiO 2 content is 4 0 percent,can fulfill the quality requirement of BF ironmaking
Keywords:sintering with low silicon material  metallurgy property  measures  produce application  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号