Morphology Engineering for High‐Performance and Multicolored Perovskite Light‐Emitting Diodes with Simple Device Structures |
| |
Authors: | Zhibin Wang Tai Cheng Fuzhi Wang Songyuan Dai Zhan'ao Tan |
| |
Affiliation: | State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, Beijing Key Laboratory of Novel Thin Film Solar Cells, North China Electric Power University, Beijing, China |
| |
Abstract: | The film morphology is extremely significant for solution processed perovskite devices. Through fine morphology engineering without using any additives or further posttreatments, a full‐coverage and high quantum yield perovskite film has been achieved based on one‐step spin‐coating method. The morphologies and film characteristics of MAPbBr3 with different MABr:PbBr2 starting material ratios are in‐depth investigated by scanning electron microscopy, atomic force microscopy, X‐ray diffraction, photoluminescence, and time resolved photoluminescence. High performance organometal halide perovskite light‐emitting didoes (PeLEDs) based on simple device structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS)/perovskite/TPBi/Ca/Al are demonstrated. The green PeLED based on MAPbBr3 shows a maximum luminance of 8794 cd m?2 (at 7.3 V) and maximum current efficiency of 5.1 cd A?1 (at 5.1 V). Furthermore, a class of hybrid PeLEDs by adjusting the halide ratios of methylammonium lead halide (MAPbX3, where X is Cl, Br, or I) are also demonstrated at room temperature. These mix‐halogenated PeLEDs show bright luminance (above 100 cd m?2) with narrow and clean emission bands over the wide color gamut. |
| |
Keywords: | light‐emitting diodes morphology engineering nonstoichiometric precursors organometal halide perovskite |
|
|