Compressional behaviour of carbon fibres

Spectroscopic-mechanical studies have been conducted on a range of carbon fibres by bonding single filaments on the top surface of a cantilever beam. Such a loading configuration allows the acquisition of the Raman spectrum of carbon fibres and the derivation of the Raman frequency strain dependence in tension and compression. Strain hardening phenomena in tension and strain softening phenomena in compression were closely observed. The differences in the slopes of the Raman frequency versus applied strain curves in tension and compression respectively, have been used to obtain good estimates of the compression moduli. A method of converting the fibre Raman frequency versus strain data into stress-strain curves in both tension and compression, is demonstrated. Values of fibre stress and fibre modulus at failure in compression compare exceptionally well with corresponding estimates deduced from full composite data. The mode of failure in compression has been found to depend upon the carbon fibre structure. It is demonstrated that certain modifications in the manufacturing technology of PAN-based fibres can lead to fibres which show resistance to catastrophic compressive failure without significant losses in the fibre compressive modulus.