| 轿车车身焊装用螺柱焊逆变电源波形控制系统 |
| |
| 引用本文： | 白志范,武士越,唐佰筠,张义,田伟,王树臣,李兆魁. 轿车车身焊装用螺柱焊逆变电源波形控制系统[J]. 焊接学报, 1996, 17(3): 162-167 |
| |
| 作者姓名： | 白志范 武士越 唐佰筠 张义 田伟 王树臣 李兆魁 |
| |
| 作者单位： | [1]吉林工业大学 [2]长春一汽第二轿车厂 |
| |
| 摘 要： | 对微机控制的轿车车身焊装线用螺柱焊ＩＧＢＴ逆变电源进行了研究。在介绍硬件电路和软件系统基础上，具体讨论了螺柱焊电源波形控制的实现方法，实测了电源的输出电压和电流波形，并做了焊接工艺试验。
|
| 关 键 词： | 螺柱焊 计算机控制 IGBT 逆变电源 轿车 车身 |
| 收稿时间： | 1995-11-01 |
| 修稿时间： | 1996-04-25 |
Waveform Modulating System of Converter for Stud Welding of Car Body |
| |
| Bai Zhifan,Wu Shiyue,Tang Baijun,Zhang Yi,Tian Wei,Wang Shuchen and Li Zhaokui. Waveform Modulating System of Converter for Stud Welding of Car Body[J]. Transactions of The China Welding Institution, 1996, 17(3): 162-167 |
| |
| Authors: | Bai Zhifan Wu Shiyue Tang Baijun Zhang Yi Tian Wei Wang Shuchen Li Zhaokui |
| |
| Affiliation: | Jilin University of Technology, Changchun,Jilin University of Technology, Changchun,Jilin University of Technology, Changchun,Jilin University of Technology, Changchun,First Automobile Works, NO.2 Car Factory.,Harbin flax work and Changchun Institute of Intelligent Instrument |
| |
| Abstract: | A microcomputer controlled IGBT converter for stud welding in the manufacture of car body has been developed.On the bas is of introduction to the hardware circuit and software system,this paper discussed in detail the realization method of the waveform modulating.The output waveforms of current and voltage from the converter were actually measured and some welding experiments were conducted in this study. |
| |
| Keywords: | s:stud welding waveform modulating IGBT converter |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
