| 涂层厚度对气化模铸钢件表面含碳量的影响 |
| |
| 引用本文： | 葛毓立. 涂层厚度对气化模铸钢件表面含碳量的影响[J]. 特种铸造及有色合金, 2002, 0(3): 17-18 |
| |
| 作者姓名： | 葛毓立 |
| |
| 作者单位： | 大连大学 |
| |
| 摘 要： | 用EPS做模型，干砂造型在负压的状态下浇注ZG25，系统研究涂层厚度对气化模铸造碳钢件表面含碳量变化。结果表明，适当的涂层厚度，铸件表面含碳量不会变化，随着涂层厚度的增加，铸件表面脱碳区－增碳区－正常区。
|
| 关 键 词： | 涂层厚度 气化模铸钢件 表面 含碳量 |
| 文章编号： | 1001-2449(2002)03-0017-02 |
| 修稿时间： | 2001-12-20 |
Effects of Coating Layer Thickness on Surface C Content in Carbon Steel Casting in EPC |
| |
| Ge Yuli. Effects of Coating Layer Thickness on Surface C Content in Carbon Steel Casting in EPC[J]. Special Casting & Nonferrous Alloys, 2002, 0(3): 17-18 |
| |
| Authors: | Ge Yuli |
| |
| Abstract: | Effects of coating layer thickness on the surface C content in ZG25 carbon steel casting in EPC by using EPS pattern, dry sand mould, and vacuum pouring were studied systematically. The results showed that surface C content has no change with proper coating layer thickness while with increasing in the coating layer thickness casting surface will appear in following sequence: decarburized zone carburized zone normal zone moreover,with decrease in decarbured zone and increase in carburized zone graduately. |
| |
| Keywords: | Coating Layer EPC Surface Carburization Surface Decarbonization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
