首页 | 本学科首页   官方微博 | 高级检索  
     

低孔隙率砂浆的强度性能和孔结构
引用本文:许仲梓,沈洋,吴建辉,唐明述. 低孔隙率砂浆的强度性能和孔结构[J]. 陶瓷科学与艺术, 1994, 0(4)
作者姓名:许仲梓  沈洋  吴建辉  唐明述
作者单位:南京化工学院材料科学与工程系
摘    要:研究了细集料种类、粒径大小及分布对低孔隙率砂浆强度性能的影响。结果表明,集料本征强度和粒径大小对强度性能有显著影响、在压蒸条件下,配合出适当的石英砂浆的抗压强度具有与净浆同样的强度,其原因在于界面化学反应。界面改善使砂浆抗压强度显著提高,但对抗折强度的影响较小。

关 键 词:低孔隙率,砂浆,强度性能,孔结构

MECHANICAL PROPERTIES AND PORE STRUCTURE OF VERY LOW POROSITY MORTAR
Xu Zhongzi,Shen Yang,Wu Jianhui,Tang Mingshu. MECHANICAL PROPERTIES AND PORE STRUCTURE OF VERY LOW POROSITY MORTAR[J]. Ceramics Science & Art, 1994, 0(4)
Authors:Xu Zhongzi  Shen Yang  Wu Jianhui  Tang Mingshu
Abstract:Influences of nature Particle,size and distyibution of micro-aggregates on the mechanical properties of very low porosity mortar were investigated. Results show that the intrinsic strength and particle size of aggregstes seem to be important factors determining the compressive strength of mortars.Under autoclave condition, the compressive strength of quartz morner with proper ratio of cement to quartz is the same as that of pure cement paste,and the reason may be attributed to the chemical reaction in the inter facial zone.Enhancement of interface appears to be effective to increasing the compressive strength, but constitutes a slight influence on the fie-cural strength.
Keywords:low porosity  mortar  mechanical properties  Pore structure.  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号