| 连铸法Gasar工艺中抽拉速率对多孔金属结构影响的理论分析 |
| |
| 引用本文： | 刘源,李言祥,刘润发,周荣,蒋业华,黎振华.连铸法Gasar工艺中抽拉速率对多孔金属结构影响的理论分析[J].金属学报,2010(2). |
| |
| 作者姓名： | 刘源 李言祥 刘润发 周荣 蒋业华 黎振华 |
| |
| 作者单位： | 清华大学机械工程系先进成形制造教育部重点实验室;昆明理工大学机电工程学院; |
| |
| 基金项目： | 国家自然科学基金委员会-云南省人民政府联合基金重点项目u0837603;;北京市自然科学基金项目2092017;;教育部留学回国人员科研启动基金项目20091020471;;清华大学骨干人才支持计划项目资助~~ |
| |
| 摘 要： | 通过求解凝固界面前沿熔体中的溶质浓度场方程,从理论上建立了一个用于描述连铸法Gasar工艺中的工艺参数对藕状多孔金属结构平均孔径、孔间距以及气孔率影响的理论模型,并将抽拉速率对多孔金属结构的影响的理论预测结果与文献中相应实验结果进行比较,结果表明,理论预测结果与实验结果吻合较好.预测结果显示,平均孔径r_g和孔间距L随抽拉速率v的升高不断降低,但气孔率变化较小,它们之间存在着简单关系为:r_g~(1.72)·v=A和L~(1.72)·v=B(其中,A和B都是取决于气体压力pH_2和pA_r以及熔体温度T的常数)。
|
| 关 键 词： | 多孔金属 金属-气体共晶 连铸 抽拉速率 |
THEORETICAL ANALYSIS ON EFFECT OF TRANSFERENCE VELOCITY ON STRUCTURE OF POROUS METALS FABRICATED BY CONTINUOUS CASTING GASAR PROCESS |
| |
| LIU Yuan,LI Yanxiang,LIU Runfa Key Laboratory for Advanced Materials Processing Technology,Ministry of Education.THEORETICAL ANALYSIS ON EFFECT OF TRANSFERENCE VELOCITY ON STRUCTURE OF POROUS METALS FABRICATED BY CONTINUOUS CASTING GASAR PROCESS[J].Acta Metallurgica Sinica,2010(2). |
| |
| Authors: | LIU Yuan LI Yanxiang LIU Runfa Key Laboratory for Advanced Materials Processing Technology Ministry of Education |
| |
| Affiliation: | LIU Yuan,LI Yanxiang,LIU Runfa Key Laboratory for Advanced Materials Processing Technology,Ministry of Education,Department of Mechanical Engineering,Tsinghua University,Beijing 100084 ZHOU Rong,JIANG Yehua,LI Zhenhua Faculty of Mechanical , Electrical Engineering,Kunming University of Science , Technology,Kunming 650093 |
| |
| Abstract: | Transference velocity is an important processing parameter to influence the final lotus type porous structure fabricated by continuous casting Gasar process.Via solving the solute diffusion equation,a theoretical model was developed to predict the effect of the transference velocity on the porosity,the pore diameter and the inter pore spacing.The predicted values at different transference velocities have a good agreement with the corresponding experimental results obtained by Japanese researcher.The average... |
| |
| Keywords: | porous metal metal-gas eutectic continuous casting transference velocity |
| 本文献已被 CNKI 等数据库收录！ |
|
