首页 | 本学科首页   官方微博 | 高级检索  
     

硅溶胶稳定性能的影响因素分析
引用本文:刘娟娟,王元政,孙艳波,张忠东,张志国,黄校亮. 硅溶胶稳定性能的影响因素分析[J]. 石化技术与应用, 2009, 27(5): 421-423
作者姓名:刘娟娟  王元政  孙艳波  张忠东  张志国  黄校亮
作者单位:中国石油兰州化工研究中心,甘肃,兰州,730060;塔里木油田石化分公司,新疆,库尔勒,841000
摘    要:硅溶胶是二氧化硅微粒分散于水中的胶体溶液,处于热力学不稳定状态。研究了硅溶胶制备过程中水玻璃浓度、混合时间、体系pH值、表面活性剂加入量等因素对其稳定性的影响。结果表明,在水玻璃浓度为(100±50)g/L、混合时间为0.5~2.0h、体系pH值小于3.8或大于9.5的较适宜条件下,可使硅溶胶的胶凝时间达到36.0h。

关 键 词:硅溶胶  水玻璃  硫酸铝  二氧化硅  胶凝时间  pH值  稳定性能

Analysis of influence factors on silica-sol stability
Liu Juanjuan,Wang Yuanzheng,Sun Yanbo,Zhang Zhongdong,Zhang Zhiguo,Huang Xiaoliang. Analysis of influence factors on silica-sol stability[J]. Petrochemical Technology & Application, 2009, 27(5): 421-423
Authors:Liu Juanjuan  Wang Yuanzheng  Sun Yanbo  Zhang Zhongdong  Zhang Zhiguo  Huang Xiaoliang
Affiliation:1.Lanzhou Petrochemical Research Center;PetroChina;Lanzhou 730060;China;2.Talimu Oil Field Petrochemical Subsidiary Company;Kuerle 841000;China
Abstract:The silica- sol, a kind of colloid solu- tion, formed by silica particles dispersing in water is in thermodynamically unstable state. The influence factors on silica - sol stability were studied such as water glass concentration, mixing time, pH value of system and level surface active agent. The results showed that under the appropriate conditions of water glass concentration of ( 100 ± 50) g/L, mixing time of 0.5 - 2.0 h, system pH value below 3.8 or above 9.5, the gelation time for silica- sol reached 36.0 h.
Keywords:silica-sol  water glass  aluminium sulfate  silica  gelation time  pH value  stabiliy  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号