| Al-Si-Cu系铸造铝合金钨极氩弧焊 |
| |
| 引用本文： | 李亚江,边秀房. Al-Si-Cu系铸造铝合金钨极氩弧焊[J]. 山东大学学报(工学版), 1993, 0(3) |
| |
| 作者姓名： | 李亚江 边秀房 |
| |
| 作者单位： | 山东工业大学材料工程系，山东工业大学材料工程系 |
| |
| 摘 要： | 用金相、扫描电镜、电子探针和X射线衍射等检验方法,从焊接工艺和焊接接头区域组织结构两方面进行分析。结果表明,采用交流钨极氩弧焊和Al-Si合金焊丝(MS311)作填充金属,可获得满意的结果。该工艺可推广应用于各种铸造铝合金构件的焊接与焊补。
|
| 关 键 词： | 钨极惰气保护焊 铝基合金 铸造合金 焊接工艺 焊接组织 |
INERT-GAS TUNGSTEN-ARC WELDING FOR Al-Si-Cu SYSTEM CASTING ALUMINIUM ALLOY |
| |
| Li Yajiang et al. INERT-GAS TUNGSTEN-ARC WELDING FOR Al-Si-Cu SYSTEM CASTING ALUMINIUM ALLOY[J]. Journal of Shandong University of Technology, 1993, 0(3) |
| |
| Authors: | Li Yajiang et al |
| |
| Affiliation: | Dept. of Mater. Eng. |
| |
| Abstract: | The welding technology and microstructure in welded joint zone of the alloy are studied by means of metallographic microscope, scanning electron microscope, electron microprobe analyzer and X-ray diffractometer. Experimental results indictae: high quality weld joint can be obtained by using Al-Si alloy welding wire (HS311) and lower welding current. The welding process may be widely applied to various aluminium alloy castings. |
| |
| Keywords: | Inert-gas shielded tungsten arc welding Aluminium-base alloy Cast alloy Welding technology Weld structure |
| 本文献已被 CNKI 等数据库收录！ |
