| 模具CAD／CAE／CAM课程的教学改革与实践 |
| |
| 引用本文： | 管爱枝,施于庆,王瑞金,喻彩丽.模具CAD／CAE／CAM课程的教学改革与实践[J].杭州应用工程技术学院学报,2010(2):153-156,160. |
| |
| 作者姓名： | 管爱枝 施于庆 王瑞金 喻彩丽 |
| |
| 作者单位： | 浙江科技学院机械与汽车工程学院,杭州310023 |
| |
| 基金项目： | 基金项目：浙江科技学院教学研究重点项目（2005-A01）;浙江科技学院重点课程建设项目（2006-02） |
| |
| 摘 要： | 模具CAD／CAE／CAM作为浙江科技学院的重点课程建设项目，在课程内容体系、教学方法手段和考核方式等方面进行了教学改革与实践：围绕应用型本科人才的培养目标，强化课程教学内容中案例教学和设计实践训练的比重，构建了课程内容体系的4个层次，建立课程的网络辅助教学平台和多元化的综合考核方式。经过数年的改革和实践，取得了良好的教学效果。
|
| 关 键 词： | 模具CAD／CAE／CAM 教学改革 应用型本科人才 课程内容体系 层次 |
Course reform and practice on CAD/CAE/CAM of die and mould course |
| |
| GUAN Ai-zhi,SHI Yu-qing,WANG Rui-jin,YU Cai-li.Course reform and practice on CAD/CAE/CAM of die and mould course[J].Journal of Hangzhou Institute of Applied Engineering,2010(2):153-156,160. |
| |
| Authors: | GUAN Ai-zhi SHI Yu-qing WANG Rui-jin YU Cai-li |
| |
| Affiliation: | (School of Mechanical and Automotive Engineering, Zhejiang University of Science and Technology, Hangzhou 310023, China) |
| |
| Abstract: | The course reform and practice on CAD/CAE/CAM of die and moulds key course in Zhejiang University of Science and Technology was discussed, including the course architecture, the teaching methods and the examination. The proportion of project analyzing and practical training in the course contents was increased for cultivation of application-oriented talents, and the four layers of the course architecture were constructed in the meantime. Furthermore, a new network-based secondary teaching system and an integrated examination way were constructed. Through the reform and practice in latest years, good teaching results have been obtained. |
| |
| Keywords: | CAD/CAE/CAM of die and mould course reform application-oriented talent course content architecture layer |
| 本文献已被 维普 等数据库收录！ |
