| AZ91D镁合金表面激光熔覆Al60Si40涂层研究 |
| |
| 引用本文： | 许晨阳,杨盼,刘彩梅,王琪,范兴旺.AZ91D镁合金表面激光熔覆Al60Si40涂层研究[J].表面技术,2009,38(6):21-23. |
| |
| 作者姓名： | 许晨阳 杨盼 刘彩梅 王琪 范兴旺 |
| |
| 作者单位： | 1. 中国矿业大学(北京)机电与信息工程学院材料科学与工程系,北京,100083
2. 中煤北京煤矿机械有限责任公司,北京,102400 |
| |
| 基金项目： | 中国矿业大学(北京)青年科研基金资助项目 |
| |
| 摘 要： | 采用预置涂层法，通过5kW横流C02激光器在AZ91D镁合金表面激光熔覆A160Si40合金粉末，以达到改善镁合金表面性能的目的。利用扫描电镜（SEM）和x射线衍射仪（XRD）分析熔覆层的微观组织，利用显微硬度计测量熔覆层深度方向上的显微硬度，利用MM-200摩擦磨损实验机测试熔覆层的耐磨性能。研究表明：表面激光熔覆层的组织呈现亚共晶组织特点，主要由α-Mg，β—Mg17Al12和Mg2Si组成；熔覆层的最高显微硬度（270HV）是基体（90HV）的3倍，其耐磨性也明显提高。
|
| 关 键 词： | AZ91D镁合金 A160Si40合金粉末 激光熔覆 熔覆层 |
Laser Surface Cladding of Al60Si40 Coatings on AZ91D Mg Alloy |
| |
| XU Chen-yang,YANG Pan,LIU Cai-mei,WANG Qi,FAN Xing-wang.Laser Surface Cladding of Al60Si40 Coatings on AZ91D Mg Alloy[J].Surface Technology,2009,38(6):21-23. |
| |
| Authors: | XU Chen-yang YANG Pan LIU Cai-mei WANG Qi FAN Xing-wang |
| |
| Affiliation: | XU Chen-yang 1,YANG Pan 1,LIU Cai-mei 2,WANG Qi 1,FAN Xing-wang 1 (1.Department of Material Science , Engineering,China University of Mining , Technology,Beijing 100083,China,2.China Coal Beijing Coal Mining Machinery Co.,Ltd,Beijing 102400,China) |
| |
| Abstract: | Carrying out with a 5kW CO_2 continuous wave laser gear, AZ91D Mg alloys were covered by the laser cladding coatings of A160Si40 alloy powders to improve its surface performances. SEM and XRD were went on the clad-ding coatings to analyze the detailed microstructures and phases, so did the microhardness measurements and the MM-200 wear property tests. It is showed that the cladding coatings are hypoeutectic structures, mainly consisting of α-Mg、β-Mg_(17)Al_(12) and Mg_2Si. The microhardness of the cladding coatings (270HV) are 3 times of the substrates (90HV). Also, the wear properties are improved obviously. |
| |
| Keywords: | AZ91D Mg alloy Al60Si40 alloy powers Laser cladding Cladding coating |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
