| 圆孔拉刀优化设计及CAD |
| |
| 引用本文： | 侯新志. 圆孔拉刀优化设计及CAD[J]. 上海工程技术大学学报, 1997, 11(3): 63-66 |
| |
| 作者姓名： | 侯新志 |
| |
| 作者单位： | 上海工程技术大学纺织学院!上海200065 |
| |
| 摘 要： | 在对圆孔拉刀的结构参数分析的基础上，建立数学模型。采用惩罚函数法进行优化，编制优化程序，得到了优化参数，运用CAD对拉刀其他部分进行程序设计。
|
| 关 键 词： | 圆孔拉刀 优化 齿升量 齿距 惩罚函数 计算机辅助设计 |
OPTIMUM DESIGN OF THE CYLINDRICAL BROACH AND CAD |
| |
| Hou Xinzhi. OPTIMUM DESIGN OF THE CYLINDRICAL BROACH AND CAD[J]. Journal of Shanghai University of Engineering Science, 1997, 11(3): 63-66 |
| |
| Authors: | Hou Xinzhi |
| |
| Abstract: | Based on the analysis of the strucural parameters of the cylindrical broach, the mathematical model is established and by using the penalty function method, optimization can be obtained. Then through the program of the cylindrical broach, the optimized parameters are gained. Futhermore, CAD is used in the program design of the remaining parts of the broach. |
| |
| Keywords: | Cylindrical broach Optimum Feed Pitch Penalty function method CAD |
| 本文献已被 CNKI 维普 等数据库收录！ |
