| ZL302铸铝电机端盖硬质阳极氧化工艺 |
| |
| 引用本文： | 马骏,赵占西,苏冬云,赵建华,冯华. ZL302铸铝电机端盖硬质阳极氧化工艺[J]. 腐蚀与防护, 2007, 28(4): 186-187 |
| |
| 作者姓名： | 马骏 赵占西 苏冬云 赵建华 冯华 |
| |
| 作者单位： | 河海大学机电工程学院,常州,213022;河海大学机电工程学院,常州,213022;河海大学机电工程学院,常州,213022;河海大学机电工程学院,常州,213022;河海大学机电工程学院,常州,213022 |
| |
| 摘 要： | ZL302铸铝的电动自行车电机端盖在硬质阳极氧化时曾发生工件烧蚀和钛挂具熔断的现象,在对烧蚀现象进行分析后,通过降低氧化电流密度和改变给电方式,使零件达到了硬质氧化的要求。
|
| 关 键 词： | ZL302铸造铝合金 硬质阳极氧化 工艺 |
| 文章编号： | 1005-748X（2007）04-0186-02 |
| 收稿时间： | 2006-05-15 |
| 修稿时间： | 2006-05-152006-06-05 |
HARD ANODIZING TECHNOLOGY OF ZL302 FOUNDRY ALUMINUM ELECTROMOTOR END COVER |
| |
| MA Jun,ZHAO Zhan-xi,SU Dong-yun,ZHAO Jian-hua,FENG Hua. HARD ANODIZING TECHNOLOGY OF ZL302 FOUNDRY ALUMINUM ELECTROMOTOR END COVER[J]. Corrosion & Protection, 2007, 28(4): 186-187 |
| |
| Authors: | MA Jun ZHAO Zhan-xi SU Dong-yun ZHAO Jian-hua FENG Hua |
| |
| Affiliation: | Institute of Mechanical and Electrical Engineering, Hehai University, Changzhou 213022, China |
| |
| Abstract: | The ablation of electromotor end cover which made of ZL302 foundry aluminum and fusion of the titanium clamp had occurred in the process of hard anodizing.The ablation phenomenon was analyzed.The hard anodizing oxidation process was completed successfully by reducing the current of oxidation and changing the electricity supply mode. |
| |
| Keywords: | ZL302 foundry aluminim Hard anodizing Technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
