| 高碳钢薄板坯连铸工艺研究 |
| |
| 引用本文： | 李梦英,王云阁,杨杰,刘丽萍,郝常鑫,杜洪波. 高碳钢薄板坯连铸工艺研究[J]. 连铸, 2012, 0(5): 1-5,26 |
| |
| 作者姓名： | 李梦英 王云阁 杨杰 刘丽萍 郝常鑫 杜洪波 |
| |
| 作者单位： | 河北钢铁股份有限公司唐山分公司,河北唐山,063016 |
| |
| 摘 要： | 通过对高碳钢的钢种特性分析及高温力学性能的测定,结合唐钢FTSC薄板坯生产线的设备工艺特点,对高碳钢浇铸温度、结晶器保护渣性能,尤其是二冷强度进行了优化,消除了铸坯表面夹渣、重皮及中间裂纹等缺陷,显著降低了铸坯缺陷发生率,提高了产品质量.
|
| 关 键 词： | 薄板坯连铸 高碳钢 裂纹 保护渣 二冷强度 |
High-Carbon Steel Continuous Casting Technology in Thin-Slab Process |
| |
| LI Meng-ying, WANG Yun-ge, YANG Jie, LIU Li-ping, HAO Chang-xin, DU Hong-bo. High-Carbon Steel Continuous Casting Technology in Thin-Slab Process[J]. CONTINUOUS CASTING, 2012, 0(5): 1-5,26 |
| |
| Authors: | LI Meng-ying WANG Yun-ge YANG Jie LIU Li-ping HAO Chang-xin DU Hong-bo |
| |
| Affiliation: | (Hebei Iron and Steel Group Co., Ltd., Tangshan Branch, Technology Research Center, Tangshan 063016, Hebei, China) |
| |
| Abstract: | Considering the characteristics of FTSC thin-slab process and the performance of high-carbon steel such as its hot ductility, low superheat was used, the composition of cast flux was optimized and the secondary cooling intensity was strengthened during the CC technology design. With the new techniques the surface entrapped slag, lamination and inside cracks were controlled. |
| |
| Keywords: | continuous casting high-carbon steel crack cast flux secondary cooling intensity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
