| 渐开线变位齿轮的参数化建模及分析 |
| |
| 引用本文： | 潘子健,孟祥宝,潘淑璋. 渐开线变位齿轮的参数化建模及分析[J]. 长春理工大学学报(自然科学版), 2011, 34(3) |
| |
| 作者姓名： | 潘子健 孟祥宝 潘淑璋 |
| |
| 作者单位： | 吉林大学机械科学与工程学院,长春,130025;吉林大学机械科学与工程学院,长春,130025;吉林大学机械科学与工程学院,长春,130025 |
| |
| 摘 要： | 渐开线变位斜齿轮的建模过程复杂,特别是端面渐开线齿廓的准确绘制和螺旋扫掠线的精确控制,可以用编程方法来实现,但要求相关专业知识做支撑。本文采用的另一方法是利用UG软件的表达式和规律曲线设计功能,根据齿轮的设计原理对渐开线变位斜齿轮精确建模,并且可以实现参数化控制。在此基础上,针对变位齿轮几何模型进行了有限元分析。
|
| 关 键 词： | 渐开线 变位斜齿轮 表达式 参数化 UG应用 |
Parameterized Modeling and Analysis of Involute Profile Shifted Gear |
| |
| PAN Zijian,MENG Xiangbao,PAN Shuzhang. Parameterized Modeling and Analysis of Involute Profile Shifted Gear[J]. Journal of Changchun University of Science and Technology, 2011, 34(3) |
| |
| Authors: | PAN Zijian MENG Xiangbao PAN Shuzhang |
| |
| Affiliation: | PAN Zijian,MENG Xiangbao,PAN Shuzhang(College of Mechanical Science and Engineering,Jilin University,Changchun 130025) |
| |
| Abstract: | It is complex on the modeling process of oblique profile shifted gear in implementation of its terminal face in-volute profile and manipulation of its tooth spiral sweeping centerline,in which it must demands specialized knowledge to designers by procedural programming method.Another concern on the subject in this paper is the utilization of curve formula function on UG,in which precision modeling of the oblique profile shifted gear and the parameterized control-ling can be realized on the principle of gear... |
| |
| Keywords: | involute oblique profile shifted gear formula parameterization UG application |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
