首页 | 本学科首页   官方微博 | 高级检索  
     

一种非离子型自乳化水性环氧树脂的制备与性能
引用本文:明杜,舒武炳.一种非离子型自乳化水性环氧树脂的制备与性能[J].中国胶粘剂,2011,20(9).
作者姓名:明杜  舒武炳
作者单位:西北工业大学理学院应用化学系,陕西西安,710129
摘    要:以甲基四氢苯酐(MTHPA)和聚乙二醇600(PEG600)为原料,合成了一种双端羧基化合物(MTHPA-PEG600-MTHPA);然后将其与环氧树脂(EP)反应,制备出一种非离子型水性EP。结果表明:该水性EP可与任何比例的水在搅拌条件下配成水乳液,并且其经3 000 r/min离心分离30 min后无分层现象,说明其稳定性较好;该水性EP的平均粒径为77 nm,其胶膜的铅笔硬度为3H,并且胶膜的附着力、耐水性、耐酸性和耐溶剂性等俱佳。

关 键 词:自乳化  水性环氧树脂  非离子型  甲基四氢苯酐  聚乙二醇

Preparation and properties for a non-ionic self-emulsifying waterborne epoxy resin
Ming Du,Shu Wubing.Preparation and properties for a non-ionic self-emulsifying waterborne epoxy resin[J].China Adhesives,2011,20(9).
Authors:Ming Du  Shu Wubing
Affiliation:Ming Du,Shu Wubing (Department of Applied Chemistry,College of Science,Northwestern Polytechnical University,Xi'an 710129,China)
Abstract:With methyl tetrahydrophthalic anhydride(MTHPA) and polyethylene glycol 600(PEG600) as raw materials,a two-terminal carboxyl compound(MTHPA-PEG600-MTHPA) was synthesized.Then a non-ionic waterborne EP(epoxy resin) was prepared by polymerization between MTHPA-PEG600-MTHPA and EP.The results showed that the water emulsions with better stability between the waterborne EP and any proportion water could be made by mix round because the emulsion stratification after 3 000 r/min for 30 min wasn't generated.The wat...
Keywords:self-emulsifying  waterborne epoxy resin  non-ionic  MTHPA  polyethylene glycol  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号