Silica-supported tantalum clusters: catalysts for conversion of methane with n-butane to give ethane, propane, and pentanes

Si0₂-supported tantalum clusters were prepared by adsorption of the precursor Ta(CH₂Ph)₅ (Ph is phenyl) on the support followed by treatments in H₂ at 523, 623, and 723 K. The resultant clusters, had approximate average diameters of 0.3, 0.8, and 2 nm, as determined by extended X-ray absorption fine structure (EXAFS) spectroscopy. The samples were tested as catalysts for conversion of methane with n-butane in a once-through flow reactor operated at atmospheric pressure and 523 K, and EXAFS spectroscopy was used to characterize the used catalysts. The results show that (a) the catalysts are active for the conversion of methane with n-butane to give ethane, propane, and pentanes; (b) catalytic activity decreased to nearly zero over a time on stream of 22 h; (c) the catalyst incorporating the smallest clusters exhibited the highest initial activity and that incorporating the largest clusters exhibited the lowest activity; (d) each used catalyst contained clusters of approximately the same nuclearity as the respective fresh catalyst, but with Ta–Ta bond lengths approximately 0.17 ? longer than those found in the fresh catalysts. The data are consistent with catalysis by the supported clusters, and the product distributions are consistent with disproportionation of n-butane accompanied by the reaction of methane with propane to give other alkanes.