Martensitic transformation in alloys of the system TiNi-TiCu prepared by ultrarapid melt cooling

Conclusion In alloys of the TiNi-TiCu system prepared in the form of thin tapes by ultrarapid melt cooling the B2-phase, which is unstable towards martensitic transformation B2B19, contains up to 35% Cu, whereas in bulk alloys prepared in the form of an ingot cooled at normal rates it contains about 10% Cu close to the M_S. In alloys containing up to 35% Cu there are no untransformed brittle phases preventing development of martensitic transformation throughout the volume of the material. The structure of alloys is quite uniform, particularly those obtained by crystallizing from the amorphous condition, and the grain size of the high-temperature phase is a fraction of a micron. The fine structure of alloys close to a globular at a high cooling rate. Thus, range of practically important alloys of the B2 type with inelastic behavior effects, e.g., the shape memory effect, is considerably expanded.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 38–41, November, 1988.