飞机刹车用长寿命高摩擦特性炭/炭复合材料制备技术(英文)

以针刺炭纤维准三向结构整体毡为预制体,经丙烯气体狭缝定向流的"外热内冷"、"内热外冷"径向热梯度CVI工艺致密技术,优化组合的热解炭/树脂炭双元炭基体技术,通过调控高温处理技术等三大关键技术制备了A320系列飞机炭刹车盘材料。与现用的A320系列飞机进口炭刹车盘进行了地面台架对比试验和装机应用。结果表明:自主开发的炭刹车盘其设计着陆能量和超载着陆能量的摩擦特性与国外相当,但在高能载(RTO)刹车时,其摩擦系数提高了21%～48%,静摩擦系数提高了28%;装机应用寿命平均达到2700次以上,比国外产品寿命提高了23%,凸现出长使用寿命和高摩擦特性的特色。

Preparation and characterization of carbon/carbon aircraft brake materials with long service life and good frictional properties

A320 series aircraft carbon/carbon brake materials were prepared by processing a needle-punched carbon fiber preform with quasi-three-dimensional integrity. The preform was first impregnated with followed by chemical vapor infiltration (CVD) using propylene as the source gas and a radial thermal gradient ("external heating, internal cooling" or "internal heating, external cooling"). For the CVD process the performs were separated by graphite pads to allow free flow of propylene along the channels thus formed. The final brake discs were obtained by a discs were compared with the advanced discs made abroad in terms of ground test and service performance. The two kinds of carbon brakes have the same friction coefficients under the designed landing energy and overload energy braking condition for A320 airplanes. Especially, under the aborted take-off condition, the friction coefficient of the domestically developed carbon brake disc was 21-48% higher and the static friction coefficient was 28% higher than that of the ones provided by the aircraft times larger than the original ones.