| 挤压铸造金属液流充型特性研究 |
| |
| 引用本文： | 罗继相,胡建华,谌伟,白旭白.挤压铸造金属液流充型特性研究[J].武汉理工大学学报,2003,25(2):23-26. |
| |
| 作者姓名： | 罗继相 胡建华 谌伟 白旭白 |
| |
| 作者单位： | 武汉理工大学 |
| |
| 基金项目： | 湖北省重点科技计划项目资助 (930 2 3) |
| |
| 摘 要： | 研究了挤压铸造中金属液流的充型特性 ,利用高速摄影观察溶体的充填状态。结果表明 :采用不同的浇口尺寸及充型速度 ,所得到的液流充型状态和特性各不相同。层流充填时伴随的是压力流和补缩流 ,紊流充填时呈现的是喷射流和压力流 ;金属液在型腔中的流动速度是不均匀的 ,中心处流体的流动阻力最小 ,流速最大 ,受到的剪切力作用最小。
|
| 关 键 词： | 挤压铸造 充型状态 层流 紊流 |
| 文章编号： | 1671-4431(2003)02-0023-04 |
| 修稿时间： | 2002年9月11日 |
The Study on the Filling Type of Metal Liquid in Squeeze Casting |
| |
| Luo Jixiang,Hu Jianhua,Chen Wei,Bai Xubai.The Study on the Filling Type of Metal Liquid in Squeeze Casting[J].Journal of Wuhan University of Technology,2003,25(2):23-26. |
| |
| Authors: | Luo Jixiang Hu Jianhua Chen Wei Bai Xubai |
| |
| Affiliation: | Luo Jixiang Hu Jianhua Chen Wei Bai Xubai |
| |
| Abstract: | This paper studies the filling type characteristics of the metal liquid flow in squeeze casting, and employs high-speed photography to examine the filled state of melting body. The result shows: different runner size and filling speed will result in different filled states and characteristics. What laminar flow followed when filled with are the pressure flow and mend contracting flow, while the disorderly flow that presented when filled with are turbulently sprayed flow and the pressure flow; In squeeze casting , the flowing speed of metal liquid in cavity is not equably--the flow obstruction of the place fluid in the center is minimum , the velocity of flow is the largest, the shear strength function received is minimum . |
| |
| Keywords: | squeeze casting filling mould states laminar flow disorderly flow |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
