| D3-1000型整经机部分机构的改造实践 |
| |
| 引用本文： | 张建光,刘卫卿,刘文星. D3-1000型整经机部分机构的改造实践[J]. 棉纺织技术, 2006, 34(2): 51-53 |
| |
| 作者姓名： | 张建光 刘卫卿 刘文星 |
| |
| 作者单位： | 西北二棉集团有限责任公司 |
| |
| 摘 要： | 针对金丸D3-1000型整经机生产过程中存在的问题,进行了以下改造:用光电式断经自停装置取代触点式断经自停装置;改进了导纱钩形状,减少了经纱绞头疵点;对经轴夹盘磨损部位采取更换局部部件的方法,节约了维修费用;设计并加装了机前安全防护装置,实现了对生产人员的安全防护.
|
| 关 键 词： | 整经机 改造 断经自停装置 导纱钩 经轴 |
| 文章编号： | 1001-7415(2006)02-0051-03 |
| 收稿时间： | 2005-09-06 |
| 修稿时间： | 2005-09-06 |
Innovation Practice of Partial Mechanism in D3-1000 Warping Machine |
| |
| Zhang Jianguang,Liu Weiqing,Liu Wenxing. Innovation Practice of Partial Mechanism in D3-1000 Warping Machine[J]. Cotton Textile Technology, 2006, 34(2): 51-53 |
| |
| Authors: | Zhang Jianguang Liu Weiqing Liu Wenxing |
| |
| Affiliation: | Xibei No2 Group Co. , Ltd. , Shaanxi |
| |
| Abstract: | According to the existing problems of Jinwan D3-1000 warping machine in the production, the innovations were done as follows. Photo-electric warp stop motion was using instead of contact warp stop motion, the form of guide wire was innovated, warp crossed ends were reduced, the method of changing partial apparatus in gripper abrasion position of warp beam to save service fee was adopted, safety protection motion was designed and set to realize the protection of production workers. |
| |
| Keywords: | Warping Machine Innovation Warp Stop Motion Guide Wire Warp Beam |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
