Erosive wear of composite materials |
| |
| Affiliation: | 1. Physics Department, Shabestar Branch, Islamic Azad University, Shabestar, Iran;2. University of Tabriz, Faculty of Physics, Emam Street, Tabriz, Iran;1. Université de Lyon, CNRS, France;2. MATEIS, Insa-Lyon, CNRS UMR5510, F-69621 Villeurbanne, France;3. Laboratoire des Matériaux Non Métalliques, IOMP, Université Ferhat Abbas, Sétif 19000, Algeria;1. Centre for Advanced Materials Technology, School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW, 2006, Australia;2. School of Mechanical Engineering, Yonsei University, Seoul, 03722, South Korea |
| |
| Abstract: | The erosive wear behavior of selected polymer matrix composite materials was investigated using an erosion wear tester. Scanning electron microscopy was used to characterize the eroded surface. The results show that the erosive wear rates in these materials are at least an order of magnitude greater than that of low carbon steel. Of the composites tested, continuous graphite fiber-epoxy composites showed erosive wear that is typical of brittle materials (maximum wear rate when the impingement is normal to the surface), while continuous aramid fiber-epoxy and chopped graphite fiber-polyphenylene sulfide showed quasi-ductile behavior (maximum wear rate at 25°–45° impingement angle). These results are discussed in terms of the observed failure modes. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
