| ABS塑料支座的注塑模设计 |
| |
| 引用本文： | 刘永秀. ABS塑料支座的注塑模设计[J]. 轻工机械, 2000, 0(3): 13-14 |
| |
| 作者姓名： | 刘永秀 |
| |
| 作者单位： | 天津理工学院,天津,300191 |
| |
| 摘 要： | 论述塑料制品的注塑模设计。此模具采用矩形弯销侧抽芯，可获得较长抽拔距，使塑件自动脱模，极大地提高了生产效率。
|
| 关 键 词： | ABS塑料 侧抽芯 弯销 顶管 顶杆 模具 设计 |
| 修稿时间： | 2000-02-02 |
Design of Injection Mould Plastic for Long Side Core Drowing |
| |
| LIU Yong-xiu. Design of Injection Mould Plastic for Long Side Core Drowing[J]. Light Industry Machinery, 2000, 0(3): 13-14 |
| |
| Authors: | LIU Yong-xiu |
| |
| Abstract: | This thesis expounds the design of injection mould plastic.The rectangular obliquitouse pin is used for side core drawing.The mould takes the longer distance of pulling.The mould is separated automatically from plastic,and raised productivity.The main points of design procedure and the detailed machinate graphs are presented in this thesis. |
| |
| Keywords: | ABS plastic side direction with drawal core rectangular obliquitous pin ejector tube ejector pin |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
