首页 | 本学科首页   官方微博 | 高级检索  
     

多次喷射雾束宏观特性的试验研究
引用本文:常汉宝,徐洪军,邵利民,陈海龙,周加东.多次喷射雾束宏观特性的试验研究[J].内燃机工程,2011,32(3).
作者姓名:常汉宝  徐洪军  邵利民  陈海龙  周加东
作者单位:海军工程大学船舶与动力学院,武汉,430033
摘    要:完成了应用于舰用TBD234V6柴油机高速响应电控啧油器在多次喷射条件下的喷油规律测试和响应特性标定.构建了高速闪光摄影试验台架,在与TBD234V6柴油机燃烧室结构相同的定容室内进行多次喷射喷雾试验并捕获喷射各时刻的影像.研究结果表明:多次喷射时雾束的最大贯穿距取决于喷油量最大的那次喷射,且明显要小于相同背压下的单次喷射;喷雾主体比单次喷射时饱满,锥角比相同背压下单次喷射时明显增大.

关 键 词:内燃机  多次喷射  雾束形态  贯穿距  锥角

Test Investigation on Macroscopic Properties of Multi-Injection Spray
CHANG Han-bao,XU Hong-jun,SHAO Li-min,CHEN Hai-long,ZHOU Jia-dong.Test Investigation on Macroscopic Properties of Multi-Injection Spray[J].Chinese Internal Combustion Engine Engineering,2011,32(3).
Authors:CHANG Han-bao  XU Hong-jun  SHAO Li-min  CHEN Hai-long  ZHOU Jia-dong
Affiliation:CHANG Han-bao,XU Hong-jun,SHAO Li-min,CHEN Hai-long,ZHOU Jia-dong(College of Marine and Power Engineering,Naval University of Engineering,Wuhan 430033,China)
Abstract:The injection rate test and response characteristics calibration under multiple injection of the quick response electron-controlled injector used in model TBD234V6 ship diesel engine were conducted.A high-speed flashing photography device was set up to record images of the sprays at various moments in the constant volume chamber,same as the engine combustion chamber in structure.Results show that the max.penetration of multi-injection spray follows by the spray of the biggest delivery and the penetration is...
Keywords:IC engine  multi-injection  spray shape  penetration  cone angle  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号