| 基于最小缩口力条件下的缩口凹模倾角 |
| |
| 引用本文： | 胡成武,邹安全,陈吉平. 基于最小缩口力条件下的缩口凹模倾角[J]. 锻压技术, 2004, 29(2): 64-66 |
| |
| 作者姓名： | 胡成武 邹安全 陈吉平 |
| |
| 作者单位： | 株洲工学院,412008;湘潭工学院;株洲工学院 |
| |
| 基金项目： | 湖南省重点学科建设项目资助，湘教通 [2 0 0 2 ] 67号 |
| |
| 摘 要： | 压缩失稳是薄壁筒形零件缩口成形时的主要失效形式。减小缩口力，避免产生压缩失稳，对顺利完成缩口成形过程具有重要的实际意义。应用金属塑性成型理论推导出圆筒形薄壁零件在缩口成形时，作用于毛坯直壁上的轴向应力最小时的缩口凹模倾角的数学表达式；并分析了摩擦系数对缩口凹模倾角的影响。
|
| 关 键 词： | 缩口成形 缩口力 缩口凹模倾角 |
Inclined angle of contracting matrix based on minimum contracting force |
| |
| Hu Chengwu Zou Anquan Chen Jiping. Inclined angle of contracting matrix based on minimum contracting force[J]. Forging & Stamping Technology, 2004, 29(2): 64-66 |
| |
| Authors: | Hu Chengwu Zou Anquan Chen Jiping |
| |
| Affiliation: | Hu Chengwu Zou Anquan Chen Jiping (Zhuzhou Institute of Technology) (Xiangtan Institute of Technology) (Zhuzhou Institute of Technology) |
| |
| Abstract: | Unstable compaction is the main failure form when thin wall cylindrical parts are shaped It is of great practical significance to smoothly finish the compaction shaping process by reducing the contracting force and avoiding unstable compaction Using the theory of metal plastic forming, the paper derives the formula of the inclined angle of contracting matrix when the axial stress reaches the minimum, which acts on the vertical wall of blanks during thin wall cylindrical parts being formed, and analyzes the effect of the friction factors on the inclined angle |
| |
| Keywords: | Contracting form Contracting force Inclined angle of contracting matrix |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
