Non-isothermal “retrogression and re-ageing” treatment schedule for AA7055 thick plate |
| |
| Affiliation: | 1. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China;2. Hunan Institute of Science and Technology Information, Changsha 410001, China;1. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China;2. CompuTherm LLC, Madison, WI 53706, USA;3. State Key Laboratory for Fabrication and Processes of Nonferrous Metals, General Research Institute for Nonferrous Metals, Beijing 100088, China;1. Department of Materials Engineering, Monash University, Clayton, Australia;2. Consultant, Bolivar, MO, USA;3. Naval Research Laboratory, Washington, DC, USA;4. Defence Science and Technology Organisation, Melbourne, Australia;1. Institute of Light Alloy, Central South University, Changsha 410083, China;2. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China |
| |
| Abstract: | In order to apply the retrogression and re-ageing (RRA) treatment to AA7055 thick plate subject to the non-isothermal retrogression condition, a kinetic model based on the mean size evolution of grain boundary precipitate (GPB) is developed firstly. An optimized RRA treatment schedule derived from AA7055 thin plate is established subsequently. Taking the retrogression temperature and time as the references, the “equivalent retrogression time” in selected non-isothermal retrogression schedule of AA7055 thick plate was predicted by the kinetic model for several thermal paths with different heating rates. The efficiencies in processing and enhancements in strength that may be realistically achieved are also examined. The results reveal that, the “equivalent retrogression time” of the selected non-isothermal retrogression schedules can be predicted successfully. The similar properties to those from the referential RRA treatment can be achieved by more than one non-isothermal RRA schedule. However, the thick plate under non-isothermal retrogression schedule with quick heating rate could achieve the same properties by less energy consumption. |
| |
| Keywords: | Non-isothermal Retrogression and re-ageing Aluminum alloy Thick plate |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
