Pore Pressure Generation of Silty Sands due to Induced Cyclic Shear Strains |
| |
Authors: | Kenan Hazirbaba Ellen M. Rathje |
| |
Affiliation: | 1Assistant Professor, Dept. of Civil and Environmental Engineering, Univ. of Alaska Fairbanks, Fairbanks, AK 99775 (corresponding author). E-mail: khazirbaba@alaska.edu 2Associate Professor, Dept. of Civil, Architectural, and Environmental Engineering, Univ. of Texas at Austin, Austin, TX 78712. E-mail: e.rathje@utexas.edu
|
| |
Abstract: | It is well established that the main mechanism for the occurrence of liquefaction under seismic loading conditions is the generation of excess pore water pressure. Most previous research efforts have focused on clean sands, yet sand deposits with fines are more commonly found in nature. Previous laboratory liquefaction studies on the effect of fines on liquefaction susceptibility have not yet reached a consensus. This research presents an investigation on the effect of fines content on excess pore water pressure generation in sands and silty sands. Multiple series of strain-controlled cyclic direct simple shear tests were performed to directly measure the excess pore water pressure generation of sands and silty sands at different strain levels. The soil specimens were tested under three different categories: (1) at a constant relative density; (2) at a constant sand skeleton void ratio; and (3) at a constant overall void ratio. The findings from this study were used to develop insight into the behavior of silty sands under undrained cyclic loading conditions. In general, beneficial effects of the fines were observed in the form of a decrease in excess pore water pressure and an increase in the threshold strain. However, pore water pressure appears to increase when enough fines are present to create a sand skeleton void ratio greater than the maximum void ratio of the clean sand. |
| |
Keywords: | Pore pressure Soil liquefaction Silts Sand, soil type Shear tests Strain Cyclic tests |
|
|