| 中间轴一系簧垂向刚度对2C0机车构架安全性的影响 |
| |
| 引用本文： | 姚东,赵利华,张开林.中间轴一系簧垂向刚度对2C0机车构架安全性的影响[J].机械设计与制造,2010(3). |
| |
| 作者姓名： | 姚东 赵利华 张开林 |
| |
| 作者单位： | 1. 广东省检验检疫技术中心,电气安全实验室,广州,510623
2. 西南交通大学,牵引动力国家重点实验室,成都,610031 |
| |
| 摘 要： | 以资阳机车厂出口到纳米比亚的Co-Co轴式机车转向架构架为例。首先对整体构架进行有限元分析,然后利用子模型法对危险部位进行精确分析,并利用热点应力法提取焊缝附近的热点应力。研究了中间轴一系簧垂向刚度对构架各危险部位热点应力值的影响。从构架安全性及机车动力学性能综合考虑,认为中间轴一系簧垂向刚度为端轴的0.75倍是比较合理的。
|
| 关 键 词： | 一系弹簧 垂向刚度 子模型法 热点应力法 |
Influence of the intermediate shaft vertical stiffness of the first spring on the security of locomotive frame |
| |
| YAO Dong,ZHAO Li-hua,ZHANG Kai-lin.Influence of the intermediate shaft vertical stiffness of the first spring on the security of locomotive frame[J].Machinery Design & Manufacture,2010(3). |
| |
| Authors: | YAO Dong ZHAO Li-hua ZHANG Kai-lin |
| |
| Affiliation: | 1Guangdong Inspection & Quarantine Technology Center/a>;Guangzhou 510623/a>;China;2Traction Power State Key Laboratory/a>;Southwest Jiaotong University/a>;Chengdu 610031/a>;China |
| |
| Abstract: | Take example for locomotive bogie frame which has been exported to Namibia by ziyang locomotive factory. First,has made finite element analysis on the overall frame,then used the sub-modeling to carry on the precise analysis to the dangerous spot,made use of hot spot stress method to extract the hot spot stress of weld location. Has studied the intermediate shaft vertical stiffness of the first spring making a great impact on the hot spot stress value of the frame variant dangerous position. From the frame ... |
| |
| Keywords: | First spring Vertical stiffness Submodel method Hot spot stress method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
