| 60t转炉-60t LF冶炼GCr15轴承钢氧含量的控制 |
| |
| 引用本文： | 邢梅峦,李晶.60t转炉-60t LF冶炼GCr15轴承钢氧含量的控制[J].特殊钢,2006,27(3):49-50. |
| |
| 作者姓名： | 邢梅峦 李晶 |
| |
| 作者单位： | 1北京科技大学冶金与生态学院，北京100083;
2石家庄钢铁有限责任公司，石家庄050031 |
| |
| 摘 要： | 石钢采用60 t转炉-60 t LF-150 mm×150 mm方坯连铸工艺生产GCr15轴承钢。工艺实践表明,采用高拉碳操作法,转炉平均终点碳含量为0.30%;改进工艺控制转炉出钢下渣量;LF精炼时采用CaO-SiO2-Al2O3高碱度渣;连铸时钢包到中间包采用套管和吹氩保护,中间包水口使用密封垫,有效地控制了钢中的氧含量。统计表明25炉轴承钢氧含量为(6.5~11.9)×10-6,平均氧含量为10.2×10-6。
|
| 关 键 词： | 60 t转炉 GCr15轴承钢 氧含量 |
| 收稿时间： | 2005-12-20 |
| 修稿时间： | 2005-12-20 |
Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t Converter - 60 t LF |
| |
| Xing Meiluan,Li Jing.Control of Oxygen Content in Bearing Steel GCr15 Steelmaking by 60 t Converter - 60 t LF[J].Special Steel,2006,27(3):49-50. |
| |
| Authors: | Xing Meiluan Li Jing |
| |
| Affiliation: | 1 School of Metallurgical and Ecological Engineering,University of Science and Technology,Beijing 100083;
2 Shijiazhuang Iron and Steel Co Ltd, Shijiazhuang 050031 |
| |
| Abstract: | The bearing steel GCrl5 is produced by 60 t converter -60 t ladle furnace(LF)- 150 mm×150 nm billet concasting process at Shijiazhuang Steel. The process practice showed that the oxygen cortent in steel was effectively controlled by catch carbon practice with average converter end C] 0.30%,improving process to control slagging amount during corverter tapping,using CaO-SiO?-Al?O? high basicity slag in LF refining,adopting casing tube and argon blown protection from ladle to tundish and using sealing washer at tundish nozzle.The statistic results showed that the oxygen content in bearing steel,25 heats,was(6.5~11.9)× 10-?,the average oxygen content was 10.2×10-?. |
| |
| Keywords: | 60 t Converter GCr15 Bearing Steel Oxygen Content |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
