| 液压挖掘机工作装置的仿真分析 |
| |
| 引用本文： | 蔡琦,杨建鸣. 液压挖掘机工作装置的仿真分析[J]. 现代制造技术与装备, 2014, 0(3): 57-58 |
| |
| 作者姓名： | 蔡琦 杨建鸣 |
| |
| 作者单位： | 内蒙古科技大学机械工程学院,包头014010 |
| |
| 摘 要： | 为了实现液压挖掘机工作装置的优化,找出工作时的特殊尺寸,采用Pro/E建立三维模型并与ADAMS虚拟样机结合仿真分析。根据动臂、斗杆、铲斗三个液压缸的运动状态,得到铲斗齿尖X方向和Y方向的位移曲线图。通过与原设计值的比较为进一步的分析提供设计的基础。
|
| 关 键 词： | 液压挖掘机 工作装置 三维建模 虚拟分析 |
Simulation Analysis of Working Device of Hydraulic Excavator |
| |
| CAI Qi,YANG Jianming. Simulation Analysis of Working Device of Hydraulic Excavator[J]. Modern Manufacturing Technology and Equipment, 2014, 0(3): 57-58 |
| |
| Authors: | CAI Qi YANG Jianming |
| |
| Affiliation: | (Department of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010 ) |
| |
| Abstract: | In order to optimize the implementation of the working device of hydraulic excavator, find the special size, through Pro/E, this paper built 3D model and made simulation analysis combined with the ADAMS virtual prototype. According to the motion state of boom, bucket rod, and three hydraulic cylinders, displacement curves is obtained bucket tip X direction and Y direction. Design basis for further analysis is provided by comparing with the original design value. |
| |
| Keywords: | hydraulic excavator working device 3D modeling virtual analysis |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
