| 硬脆性材料用柔性磨具研磨的加工表面粗糙度建模 |
| |
| 引用本文： | 章玉强,胡中伟,朱泽朋,崔长彩,陈铭欣,谢斌晖,李瑞萍.硬脆性材料用柔性磨具研磨的加工表面粗糙度建模[J].中国机械工程,2022,33(7):834-841. |
| |
| 作者姓名： | 章玉强 胡中伟 朱泽朋 崔长彩 陈铭欣 谢斌晖 李瑞萍 |
| |
| 作者单位： | 1.华侨大学制造工程研究院，厦门，361021
2.脆性材料产品智能制造国家地方联合工程中心，厦门，361021
3.福建晶安光电有限公司，泉州，362411 |
| |
| 基金项目： | 国家自然科学基金（U1805251,51675192）;
福建省区域发展项目（2019H4014） |
| |
| 摘 要： | 通过分析磨粒与工件表面的作用过程,建立了硬脆性材料柔性磨具加工表面粗糙度的理论预测模型.以橡胶结合剂金刚石研磨盘为柔性磨具、蓝宝石衬底为工件,在不同弹性模量、磨粒浓度、磨粒粒度和研磨压力下开展研磨试验,将不同研磨条件下的表面粗糙度试验值与理论预测值进行比较,发现试验结果与理论模型预测结果的趋势一致,且预测误差为7.71...
|
| 关 键 词： | 研磨 表面粗糙度 柔性磨具 蓝宝石衬底 |
Surface Roughness Modeling for Lapping Hard and Brittle Materials by Flexible Abrasive Tools |
| |
| ZHANG Yuqiang,HU Zhongwei,ZHU Zepeng,CUI Changcai,CHEN Mingxin,XIE Binhui,LI Ruiping.Surface Roughness Modeling for Lapping Hard and Brittle Materials by Flexible Abrasive Tools[J].China Mechanical Engineering,2022,33(7):834-841. |
| |
| Authors: | ZHANG Yuqiang HU Zhongwei ZHU Zepeng CUI Changcai CHEN Mingxin XIE Binhui LI Ruiping |
| |
| Affiliation: | 1.Institute of Manufacturing Engineering,Huaqiao University,Xiamen,Fujian,361021
2.National Engineering Research Center for the Intelligent Manufacturing Technology of Brittle Materials and Products,Xiamen,Fujian,361021
3.Fujian JingAn Opto. Electronics Co.,Ltd.,Quanzhou,Fujian,362411 |
| |
| Abstract: | By analyzing the interaction processes between abrasive particles and the surface of the workpiece, a theoretical prediction model for surface roughness of the hard and brittle materials by flexible abrasive tool was established herein. The rubber bond diamond lapping disc was selected as the flexible abrasive tool, and the sapphire substrate was selected as the workpiece. The lapping experiments were carried out under different elastic modulus, abrasive particle concentration, abrasive particle size, and different lapping pressures. And then, the experimental values of the surface roughness were compared with the theoretical predicted values under different lapping conditions, which shows that the experimental values are consistent with the predicted results of the theoretical model. The prediction errors are as 6.32%~11.76%, which proves that the established theoretical prediction model of surface roughness is reliable for lapping hard and brittle materials by flexible abrasive tools. |
| |
| Keywords: | lapping surface roughness flexible abrasive tool sapphire substrate |
|
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
|
