首页 | 本学科首页   官方微博 | 高级检索  
     

爆炸载荷冲击下假人下肢的材料参数识别和修正方法
引用本文:李明星,张明,陈四春,李锴,刘状,袁溪. 爆炸载荷冲击下假人下肢的材料参数识别和修正方法[J]. 兵工学报, 2021, 42(9): 1895-1901. DOI: 10.3969/j.issn.1000-1093.2021.09.010
作者姓名:李明星  张明  陈四春  李锴  刘状  袁溪
作者单位:南京理工大学 机械工程学院, 江苏 南京210094;中国兵器工业集团江山重工研究院有限公司 南京研究院分公司,江苏 南京210014;南京理工大学 机械工程学院, 江苏 南京210094;中国兵器工业集团江山重工研究院有限公司 南京研究院分公司,江苏 南京210014;宿迁明远建设有限公司, 江苏 宿迁223800;南京医科大学 继续教育学院, 江苏 南京210029
基金项目:国家自然科学基金项目(11802140、51405232)
摘    要:为提高假人在爆炸载荷冲击下的模拟精度,以高速垂向冲击下假人下肢材料本构参数校验寻优为目标,基于爆炸载荷冲击波作用于车身结构产生的结构响应特性,确定模拟爆炸载荷冲击台架的冲击速度。设置不同的冲击速度进行假人下肢冲击实验,获取下肢的冲击力-时间曲线。对下肢的重要材料参数进行实验设计并获取仿真下肢胫骨力峰值,以仿真数据与实验数据误差最小化为目标进行下肢材料参数寻优。通过台架实验与有限元数值仿真校验对材料参数进行优化,得到下肢各组件之间材料本构模型参数的最佳匹配。结果表明:假人下肢模型材料参数优化后的仿真结果与实验结果一致性较好,可为高速垂向冲击下假人下肢材料模型修正提供技术支持。

关 键 词:假人下肢  爆炸载荷冲击  材料参数  逆向工程  模拟冲击台架

Identification and Correction Method of Material Parameters of Dummy's Lower Limbs Subjected to Impact of Explosive Load
LI Mingxing,ZHANG Ming,CHEN Sichun,LI Kai,LIU Zhuang,YUAN Xi. Identification and Correction Method of Material Parameters of Dummy's Lower Limbs Subjected to Impact of Explosive Load[J]. Acta Armamentarii, 2021, 42(9): 1895-1901. DOI: 10.3969/j.issn.1000-1093.2021.09.010
Authors:LI Mingxing  ZHANG Ming  CHEN Sichun  LI Kai  LIU Zhuang  YUAN Xi
Affiliation:(1.School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,Jiangsu, China;2.Nanjing Research Institute Branch, Jiangshan Heavy Industry Research Institute Co.,Ltd., China North Industries Group Corporation Limited, Nanjing 210094,Jiangsu,China;3.Suqian Mingyuan Construction Engineering Co.,Ltd.,Suqian 223800,Jiangsu, China;4.School of Continuing Education, Nanjing Medical University,Nanjing 210029,Jiangsu,China)
Abstract:The constitutive parameters of the dummy's lower limb material subjected to high-speed vertical impact are checked and optimized to improve the simulation accuracy of dummy under the impact of explosive load. In view of the structural response characteristics of vehicle body subjected to explosion shock wave load, the impact velocity of simulated explosion load impacting the test bench is determined. The impact test of dummy’slower limbs is carried out by setting different impact speeds to obtain the impact force-time curves of the lower limbs. The important material parameters of lower limbs are experimentally designed and the peak value of simulated lower limb tibial force is obtained to optimize the lower limb material parameters with the goal of minimizing the error between the simulated data and the experimental data. Through bench test and finite element numerical simulation verification, the material parameters are optimized, and the best matching of the material constitutive model parameters are obtained for the components of the lower limbs. The results show that the simulated results after optimizing the material parameters of the dummy's lower limb model are in good agreement with the test results, which can provide technical support for the revision of the dummy lower limb material model under high-speed vertical impact.
Keywords:lowerlimbofdummy  explosiveloadimpact  materialparameter  reverseengineering  simulatedimpactbench  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《兵工学报》浏览原始摘要信息
点击此处可从《兵工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号