| 天然气强化烧结生产技术研究 |
| |
| 引用本文： | 刘周利,白晓光,李玉柱. 天然气强化烧结生产技术研究[J]. 包钢科技, 2021, 47(1): 22-25,56. DOI: 10.3969/j.issn.1009-5438.2021.01.008 |
| |
| 作者姓名： | 刘周利 白晓光 李玉柱 |
| |
| 作者单位： | 内蒙古包钢钢联股份有限公司技术中心,内蒙古 包头 014010 |
| |
| 摘 要： | 文章以天然气为研究对象,在实验室利用烧结杯开展了天然气替代部分焦粉强化烧结试验。研究结果表明:当天然气喷吹时间为15 min,热量补充比例为25%时,烧结矿成品率、转鼓强度、固体燃耗、烧结矿还原性、低温还原粉化指标以及烧结矿显微结构最优。
|
| 关 键 词： | 天然气 烧结 研究 |
Study on Intensifying Production Technology of Sintering with Natural Gas |
| |
| Liu Zhou-li,Bai Xiao-guang,Li Yu-zhu. Study on Intensifying Production Technology of Sintering with Natural Gas[J]. Science & Technology of Baotou Steel(Group) Corporation, 2021, 47(1): 22-25,56. DOI: 10.3969/j.issn.1009-5438.2021.01.008 |
| |
| Authors: | Liu Zhou-li Bai Xiao-guang Li Yu-zhu |
| |
| Affiliation: | (Technical Center of Inner Mongolia Baotou Steel Union Co.,Ltd.,Baotou 014010,Inner Mongolia Autonomous Region,China) |
| |
| Abstract: | In this paper,it is introduced the experiment of intensifying sintering by replacing part of coke powder with natural gas using sinter pot carried out in the laboratory by taking natural gas as the object of study.The study results showed that the yield of sinter,drum strength,solid fuel consumption,reducibility of sinter,low-temperature reduction degradation index and microstructure of sinter were optimum when the jet time of natural gas was 15 min and adding proportion of heat was 25%. |
| |
| Keywords: | natural gas sintering study |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
